Fricition and Wear Tester
MR-S10B Four Ball Frictio
Rp 727.350.973
Test force range ( N ) : 40 to 10000 Friction measurement range (N): 0~300 Spindle speed range (r/min) : 200 to 2000 Spindle speed error ( r/min) : ±10 Heater
MR-S10G Lever Four Ball F
Rp 528.247.061
Test force loading method: Manual loading of weights Maximum friction: 200N Relative error of friction indication should not be greater than: ±3% Temperature control
MPV-20B Screen Display PV
Call
Maximum Test Force: 20kN 2.2 Test Force Accuracy: ± 1% 2.3 Spindle speed range: 200r/min to 2800 r/min 2.4 Spindle Speed Control Accuracy: ± 10
MM-W1A Vertical Universal
Call
Maximum test force ( kN ) : 1 Test force measurement range : 0.4%-100% of the maximum test force Errors below 200N (N) : ≤ ±2 Relative error of indication
MM-W1B Vertical Universal
Call
Maximum test force: 1kN Test force working range: 0.4% ~ 100% of maximum test force The relative error of the test force indication is not greater than : ± 1% , the
MM-U10 Screen Display Mat
Call
(1) Maximum test force: 10kN ; (2) Accuracy of test force indication: ± 1% (3) Spindle speed range: 100~2800r/min , stepless speed regulation; (4) Spindle speed
MM-U5G (10G) Screen Displ
Call
Test force accuracy : ±1% Spindle speed range (r/min) : 100 to 2800 (steplessly adjustable) Rotation measurement accuracy : ±10 r/min Maximum friction :
MR-H5A Ring Block Wear Te
Call
◆ Maximum test force: 5000N ◆ spindle speed range: 100 ~ 1500r/min stepless adjustable ◆ Test force ratio: 10:1 ◆ Friction rod scale: 0.5N/100mm ◆ Test oil
MR-H5B Ring Block Abrasio
Call
Maximum test force ( kN) : 5 Spindle speed range (r/min) : 0-1500 Spindle speed error (r/min) : 100 r/min or more does not exceed ±5 Test oil temperature range
MR-H3A High Speed R
Call
Maximum test force (N) : 3000 Test force maintains maximum allowable change : ± 1% of maximum test force Maximum friction (N) : 300 Spindle speed range (r/min) :
MM-P2 Screen Display Wear
Call
1 ) Maximum Test Force (N ): 2000 2 ) Relative error of test force indication: ± 2% 3 ) Measure the maximum frictional torque ( N·m) : 15 4) Frictional
MM-P05 High Speed Disk Pi
Call
(1) Spindle speed: 200r/min~12000r/min , stepless frequency control; When the speed is lower than 1000r/min , the control accuracy is ± 10r/min
MR-S10D Electro-Hydraulic
Call
Test force range ( N ) : 40 to 10000 Friction measurement range (N) : 0~300 Spindle speed range (r/min) : 200 to 2000 Spindle speed error ( r/min) : ±10 Heater