5 Gallon Pail Hot Melt System

Call

Availability: Pre Order 0 Hari
Categories: Automation
Type:
Section:Thermadose Dispensing
Seller:    Rayastock

OverView

The Thermadose® hot melt pail pump system has an innovative elevator enabling easy loading and removal of a pail. The pail is placed on the elevator platform and is automatically raised to engage a static or optional inflatable seal depending on material specifications. A thermal platen is heated to the programmed temperature and the material flows to the gear pump while pressure is maintained by the platen.

 

Once programmed, a signal actuates a gear-pump with pressure regulation that provides a consistent, pulse-free and repeatable dispense rate. Temperature of the pail contents is kept to an optimum thermal efficiency by either an easy-clean smooth-platen for high-cost materials with low flow rates, or with a spiral-grid thermal platen that increases the surface area in contact with the material and is suitable for high-flow, hard-to-melt materials.

 

The absence of external rams results in a safe operator environment. All moving functions are fully enclosed and the enclosure is safety interlocked. Swivel-heated hose control-pods provide ergonomic handling for manual operations and dressing of hoses to automated systems.


Specifications

Power     200 - 240VAC 50/60 Hz - 30 amp max

Air     65 - 90psi

Pump type     Gear-pump

Motor     Variable speed brushless AC

Pump rate     195 lbs/hr (88.5Kg)

Adhesive     All types

Melt rate     40 lbs/hr smooth platen or 58 lbs/hr Conch-Grid plate

Hoses     Standard - 6 JIC - 24ft (7.3m) dual outlet cable

Applicators     Manual or automatic - extrusion or swirl

Timers     Direct panel connection

Air control     For spray & swirl optional - integrated in lower cabinet

Dimensions     H 52 x W 30 x D 22 (132 x 76 x 56cm)

Weight     5 gallon - 375 lbs (170Kg)

Standards     CE & RoHS compliant